drywall joint fibre glass adhesive tape
Coated with acrylic,High tensile, High self-adhesive, now the products are sold well to Europe, Middle east, Southeast Asian and South Americian, Etc.
Direction of Application
1 wall must be clean and dry
2 center and apply tape over the length of the joint, pressing firmly.
3 Apply a generous first coat of compound over the tape and through the mesh,making sure to completely fill the joint crevice
4 let dry completely then sand slightly
5 apply sufficient thin finishing coats to produce a small wall surface.
6 cut or butted boards do not have a tapered edge, special care must be taken to assure proper compound penetration of all joints, this may result in slight build-up of compound that will require an increased amount of edge feathering